產品展示
聯系我們
聯系人：麥女士
手機：+86 15270269218
電話：
Q Q：3136378118
郵箱：stodcdcs@gmail.com
地址：江西省九江市瑞昌市東益路23號賽湖農商城401號
5017-T
ISA/PCI擴展
以下說明描述了ISA或PCI擴展的安裝
董事會。
警告
ISA和/或PCI板的總可用功率為150W
大限度
1、關閉本機電源，拔下1600背面的電源線。
2、從頂蓋上拆下三顆螺釘，打開1600單元（見圖
2–5).
從壓緊支架上拆下兩個螺釘，然后拆下壓緊裝置
支架（見圖2-8）。
4、從所需軌道上拆下ORB螺釘和ORB蓋。
將ISA或PCI擴展板滑入所需插槽。
8.
1600系列帶奔騰4第2章-安裝
筆記
不要用力或施加不均勻的壓力。
將板推入背板連接器。
壓緊支架
擴展卡
圖2-8。安裝ISA或PCI板
用兩個螺釘重新安裝壓緊支架（泡沫側朝下）。
通過將螺釘穿過電路板金屬上的孔來固定電路板
進入軌道頂部。
9、更換頂蓋。
ISA/PCI Expansion The following instructions describe the installation of ISA or PCI expansion boards. Warning Total power available for ISA and/or PCI boards is 150W maximum. 1. Turn off power to the unit and unplug the power cord on the rear of the 1600. 2. Open the 1600 unit by removing the three screws from the top cover (see Figure 2–5). 3. Remove the two screws from the hold down bracket and remove the hold down bracket (see Figure 2–8). 4. Remove the ORB screw and ORB cover from the desired track. 5. Slide the ISA or PCI expansion board into the desired slot. 8 1600 Series with Pentium 4 Chapter 2 – Installation Note Do not force the boards or apply uneven pressure. 6. Push the board into the backplane connectors. Hold Down Bracket Expansion Card Figure 2–8. Installing ISA or PCI Boards 7. Reinstall the hold down bracket (foam side down) with two screws. 8. Secure the board by installing the screw through the hole in the board’s metal ORB and into the top of the track. 9. Replace the top cover.
相關產品
