產品展示
聯系我們
聯系人：麥女士
手機：+86 15270269218
電話：
Q Q：3136378118
郵箱：stodcdcs@gmail.com
地址：江西省九江市瑞昌市東益路23號賽湖農商城401號
332-657696-000
ezPORT設置提供了一個管理器和一個用戶密碼。如果同時使用兩個密碼，則必須首先設置主管密碼。可以對系統進行配置，以便所有用戶在每次系統引導時或執行ezPORT設置時，都必須使用管理員密碼或用戶密碼輸入密碼。002.53（C）版權所有1985-2002，American Megatrends，Inc.要在忘記密碼的情況下重置安全性，必須排空NVRAM并重新配置。清除CMOS密碼：1。關閉設備電源。2、將開關S2位置1移到On。3、等待約5秒鐘。4、將開關S2位置1移到Off。5、給裝置通電。當重新給裝置通電時，CMOS密碼將被清除，CMOS將設置為其默認值。BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Security Settings安裝或更改密碼。←→ 選擇屏幕↑↓ 選擇項目Enter Change F1 General Help F10 Save and Exit ESC Exit Supervisor Password：Not Installed User Password：Not Installed Change Supervisor Password Change User Password Clear User Password Boot Sector Virus Protection[禁用]
The ezPORT setup provides both a Supervisor and a User password. If you use both passwords, the Supervisor password must be set first. The system can be configured so that all users must enter a password every time the system boots or when ezPORT setup is executed, using either the Supervisor password or User password. 002.53 (C) Copyright 1985-2002, American Megatrends, Inc. To reset the security in the case of a forgotten password you must drain the NVRAM and reconfigure. To clear the CMOS password: 1. Turn off power to the unit. 2. Move switch S2 position 1 to On. 3. Wait approximately 5 seconds. 4. Move switch S2 position 1 to Off. 5. Power up the unit. When power is reapplied to the unit, the CMOS password will have been cleared, and the CMOS will be set to its defaults. BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit Security Settings Install or Change the password. ←→ Select Screen ↑↓ Select Item Enter Change F1 General Help F10 Save and Exit ESC Exit Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password Clear User Password Boot Sector Virus Protection [Disabled]
相關產品
